Features
V370A
Page 2
FEATURES
V370A Features:
•
V370A is based on the Mendocino Processor operating at 300 ~
433MHz on PGA370. The board is configured by an ESDJ to match
your CPU clock speed.
•
Designed with VIA APOLLO PRO AGPset.
•
Supports up to 768 Mega of DRAM (minimum of 16 MB) on board, You can
use 168-pin DIMM x 3. It will automatically detect Extended Data Output
(EDO) DRAM at 66MHz only or Synchronous DRAM memory (SDRAM) at
66MHz or 100MHz (please see Section 3-2).
•
V370A will support Error Checking and Correcting (ECC) when using
paritys DRAM memory modules. This will detect multiple bit errors and
correct 1-bit memory errors.
•
Supports (2) 16 bit ISA slots, (4) 32 bit PCI slots, (1) AGP slot and provides
(2) independent high performance PCI IDE interfaces capable of supporting
PIO Mode 3/4 and Ultra DMA 33 devices. The V370A supports (2)
PCI Bus Master slots and a jumperless PCI INT# control scheme which
reduces configuration confusion when plugging in PCI card(s).
•
Supports ATAPI (e.g. CD-ROM) devices on both Primary and Secondary IDE
interfaces.
•
Designed with Winbond W83877TF Multi I/O: (1) floppy port, (1) parallel port
(EPP, ECP), and (2) serial ports (16550 Fast UART).
Note: Japanese “Floppy 3 mode” is also supported
•
Includes a PS/2 mouse connector.
•
Allows use of a PS/2 keyboard.
•
Features Award Plug & Play BIOS. With Flash Memory you can always
upgrade to the current BIOS as they are released. (http://www.
2themax.
com
please visit our Technical Support section for the latest updates)
