AWARD BIOS 3-7
DRAM Timing:
The default value is 70ns.
60ns
:
2 (faster) Burst Wait State, for 60~70ns Fast Page Mode/EDO DRAM.
70ns
:
3 (slower) Burst Wait State, for 70ns Fast Page Mode/EDO DRAM.
Video BIOS Cacheable
:
The default value is Enabled.
Enabled
:
This field Enabled the Video BIOS Cacheable to speed up the VGA
Performance.
Disabled
:
Disabled the Video BIOS Cacheable function.
8/16 Bit I/O Recovery Time:
The default value is 1.
8 Bit I/O Recovery Time
:
This field defines the recovery time from 1 to 8 for 8-bit
I/O.
16 Bit I/O Recovery Time
:
To define the recovery time from 1 to 4 for 16-bit I/O.
Memory Hole at 15M-16M:
The default value is Disabled.
Disabled
:
Normal Setting.
Enabled :
This field enableds the main memory (15~16MB) remap to ISA BUS.
Peer Concurrency:
The default value is Enabled.
DRAM ECC/PARITY Select:
The default value is ECC. This field defines the
DRAM is parity or ECC properly if all DRAs are 72-bit wide. A system with a
mixture of 64-bit and 72-bit wide should disable PARITY and ECC.
Memory Parity/ECC Check:
The default value is Auto. That will Auto detect the
DRAM is none parity parity or ECC.
L2 Cache Cacheable Size:
The default value is 64MB. This board's L2 cache
cacheable DRAM size were 64MB.
Single Bit Error Report:
The default value is Enabled. When yuou insert 72-bit
wide DRAMs. The BIOS will show a warning message on display before the single-
bit detected/corrected errors.
Chipset NA# Asserted:
The default value is Enabled. This is to enabled the L2
Cache's performance.
