manualshive.com logo in svg

EPOX EP-MVP4F, Руководство пользователя, Страница: 38 / 65

Поделиться
Скачать
EPOX EP-MVP4F Скачать руководство пользователя страница 38

BIOS

EP-MVP4F

Page 4-18

Primary Slave UDMA: This allows you to select the mode of operation for the

hard drive.  The default is Auto.

Auto:

The computer will select the optimal setting.

Disabled: The hard drive will run in normal mode.

Secondary Master UDMA: This allows you to select the mode of operation for

the hard drive.  The default is Auto.

Auto:

The computer will select the optimal setting.

Disabled:  The hard drive will run in normal mode.

Secondary Slave UDMA: This allows you to select the mode of operation for the

hard drive.  The default is Auto.

Auto:

The computer will select the optimal setting.

Disabled:  The hard drive will run in normal mode.

Onboard FDD Controller: This controls the state of the onboard floppy

controller. The default value is Enabled.

Enabled: Enable the Onboard floppy drive interface controller.

Disabled: Disable the Onboard floppy drive interface controller.

Onboard Serial Port 1: This field allows the user to configure the 1st serial

port.  The default is Auto.

AUTO: Enable Onboard Serial port 1 and address is Auto adjusted

COM1: Enable Onboard Serial port 1 and address is 3F8H/IRQ4.

COM2: Enable Onboard Serial port 1 and address is 2F8H/IRQ3.

COM3: Enable Onboard Serial port 1 and address is 3E8H/IRQ4.

COM4: Enable Onboard Serial port 1 and address is 2E8H/IRQ3.

Disabled: Disable Onboard Serial port 1.

Onboard Serial Port 2: This field allows the user to configure the 2nd serial

port.  The default is Auto.

AUTO: Enable Onboard Serial port 2 and address is Auto adjusted.

COM1: Enable Onboard Serial port 2 and address is 3F8H/IRQ4.

COM2: Enable Onboard Serial port 2 and address is 2F8H/IRQ3.

COM3: Enable Onboard Serial port 2 and address is 3E8H/IRQ4.

COM4: Enable Onboard Serial port 2 and address is 2E8H/IRQ3.

Disabled: Disable Onboard Serial port 2.

Содержание EP-MVP4F


































































Отзывы:

Нет отзывов