EPOX EP-7KXA Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 73

EPOX EP-7KXA Скачать руководство пользователя страница 13

Features

EP-7KXA

Page 2-1

Section 2

FEATURES

EP-7KXA Features:

EP-7KXA is based on the AMD Athlon Processor operating at 500 ~ 800MHz

on SlotA.

Designed with VIA KX133 AGPset.

Supports up to 768MB of DRAM (minimum of 8 MB) on board (please

see Section 3-2).

EP-7KXA will support Error Checking and Correcting (ECC) when using

parity SDRAM memory modules. This will detect multiple bit errors and
correct 1-bit memory errors.

Supports (1) 16 bit ISA slots, (5) 32 bit PCI slots, (1) 4X AGP slot, (1) AMR

slot and provides (2) independent high performance PCI IDE interfaces
capable of supporting PIO Mode 3/4 and Ultra DMA 33/66 devices.
The EP-7KXA supports (5) PCI Bus Master slots and a jumperless PCI
INT# control scheme which reduces configuration confusion when plugging
in PCI card(s).

Supports ATAPI (e.g. CD-ROM) devices on both Primary and Secondary

IDE interfaces.

Designed with on chip Multi I/O: (1) floppy port, (1) parallel port (EPP,

ECP), and (2) serial ports (16550 Fast UART).
Note: Japanese Floppy 3 mode is also supported

Features Award Plug & Play BIOS. With Flash Memory you can always

upgrade to the current BIOS as they are released.

EP-7KXA utilizes a Lithium battery which provides environmental

protection and longer battery life.

«
...
11
12
13
14
15
...
»

Содержание EP-7KXA










































































Отзывы:

Нет отзывов