BIOS
EP-68LXR
Page 4-15
MODEM Use IRQ: Name the interrupt request (IRQ) line assigned to the modem
(if any) on your system. Activity of the selected IRQ always awakens the system.
Default is IRQ 3.
N/A: No IRQ is used.
3: IRQ 3
4: IRQ 4
5: IRQ 5
7: IRQ 7
9: IRQ 9
10: IRQ 10
11: IRQ 11
The EP-68LXR supports HDD Power Down, Doze and Standby power saving
functions when using the Intel Pentium II Processor.
The default is Disabled
Doze Mode: The “Doze” mode timer starts to count when no “PM events” have
occurred.
Standby Mode: When the standby mode timer times-out, it will enter the standby
mode and retain CPU at a slow working speed. The screen will be blanked out.
Suspend Mode: This function works only when the Pentium II Processor is
installed. The timer starts to count when “System Standby” mode timer is timed out
and no “PM Events” are occurring. Valid range is from 1 minute up to 1 hour.
HDD Power Down: HDD Standby timer can be set from 1 to 15 minute(s).
VGA Active Monitor: Use this option if your monitor has advanced power saving
features.
The default is Enabled
Enabled: Your monitor’s power features will be included in power
management.
Disabled: Your monitor’s power features will not be included in power
management.
Soft-Off by PWR-BTTN: Use this to select your soft-off function.
The default is Instant Off.
Instant Off: Turns off instantly.
4 Second Delay: Turns off after a 4 second delay. If momentary press of
button, the system will go into Suspend Mode. Press again to take system
out of Suspend Mode.
