background image

 

 

 Introduction 1-1

Chapter 1

Introduction

This

 mainboard is a high performance system hardware based on Intel

Pentium  processor and is equipped with an AGP slot, four PCI slots, three
standard ISA slots, Super Multi-I/O controller and dual port PCI-IDE
connectors for the future expansion. The hardware dimension is 220mm x
260mm with a four-layer-design technology.

Specification

VIA Apollo MVP3 AGP/PCIset chipset.

Intel Pentium  Processor, Pentium Processor with MMX technology, AMD
K5/K6, Cyrix 6x86L/6x86MX & idt C6 operating at 120 ~ 500 MHz with 321

ZIF socket 7 provides scalability to accept faster Processors in the future.

Supports  up to 384 MegaBytes of  memory (168-Pin DIMM SOCKET x 3 ).

Supports 512KB (Pipelined Burst SRAM) L2 Cache.

Supports three 16 bit ISA slots ,four 32 bit PCI slots and an AGP slot and

provides two independent high performance PCI IDE interfaces capable of
supporting PIO Mode 3/4 and Ultra-DMA33 devices.

Supports ATAPI (e.g. CD-ROM) devices on both IDE interfaces.

Supports a floppy port, a parallel port (EPP,ECP port), two serial ports

(16550 Fast UART compatible), 1 USB Connector, a PS/2 style mouse
connecter and an AT style keyboard connector.

Supports Award Plug & Play BIOS.

Supports CPU Hardware sleep, APM (Advanced Power Management) and

ACPI (Advanced Configuration Power Interface).

       Supports an ATX power supply connector for a Remote On/Off , Phone-

Ring Power On and a Keyboard Power On Function.

       Supports Switching Regulator for CPU power supply. and single jumper for

CPU working voltage selection.

       Supports ESDJ (Easy Setting Dual Jumper) function for CPU selection.

      Support hardware monitor  function.

R

Содержание EP-58MVP3C-M













































Отзывы: