manualshive.com logo in svg

EPOX EP-3S1A, Руководство пользователя, Страница: 52 / 84

Поделиться
Скачать
EPOX EP-3S1A Скачать руководство пользователя страница 52

BIOS

EP-3S1A

Page 4-20

HDD Power Down

When enabled and after the set time of system inactivity, the hard disk drive will be
powered down while all other devices remain active.
The choice: Enabled, Disabled.

Soft-Off by PWR-BTTN

Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has “hung.”  The default is Instant-off.
The choice: Delay 4 Sec, Instant-Off.

PowerOn By Ring

This option is used to set the remote ring in and Wake on LAN (WOL) features.
The choice: Enabled, Disabled.

CPU Thermal-Throttling

Select the CPU THRM-Throttling rate.
The choice: 25.0%, 37.5%, 50.0%, 62.5%, 75.0%, 87.5%.

Resume by Alarm

This option allows you to have the system turn on at a present time each day or on a
certain day.
The choice: Disabled, Enabled.

**

   PM Events  

  **

PM events are I/O events whose occurrence can prevent the system from entering a
power saving mode or can awaken the system from such a mode.  In effect, the
system remains alert for anything which occurs to a device which is configured as

Enabled

 , even when the system is in a power down mode.

Primary IDE 0
Primary IDE 1

Secondary IDE 0

Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ[A-D] #

Содержание EP-3S1A





















































































Отзывы:

Нет отзывов