EPOX EP-3S1A Скачать руководство пользователя страница 2

Страница: 2 / 84

EP-3S1A

User Notice

No part of this product, including the product and software may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any

language in any form without the express written permission of EPoX Computer

Company (hereinafter referred to as EPoX) except for documentation kept by the

purchaser for backup purposes.

We provide this manual as is without warranty of any kind, either expressed or

implied, including but not limited to the implied warranties or conditions of

merchantability or fitness for a particular purpose. In no event shall EPoX be

liable for any loss of profits, loss of business, loss of use or data, interruption of

business or for indirect, special incidental, or consequential damages of any kind,

even if EPoX has been advised of the possibility of such damages arising from any

defect or error in the manual or product. EPoX may revise this manual from time

to time without notice. For updated BIOS, drivers, or product release information

you may visit our websites at http://www.epox.com or http://www.epox.com.tw.

Products mentioned in this manual are mentioned for identification purposes only.

Product names appearing in this manual may or may not be registered trademarks

or copyrights of their respective companies.

The product name and revision

number are both printed on the mainboard itself.

Handling Procedures

Static electricity can severely damage your equipment. Handle the EP-3S1A and

any other device in your system with extreme care and avoid unnecessary contact

with system components on the mainboard. Always work on an antistatic surface to

avoid possible damage to the mainboard from static discharge. Always have the

power supply unplugged and powered off when inserting and removing devices

within the computer chassis. EPoX assumes no responsibility for any damage to

the EP-3S1A mainboard that results from failure to follow instruction or failure to

observe safety precautions.

CAUTION

The EP-3S1A mainboard is subject to damage by static

electricity. Always observe the handling procedures.

Содержание EP-3S1A





















































































Результаты поиска

Содержание EP-3S1A

Отзывы:

Похожие инструкции для EP-3S1A

Бренды по названию

Популярные бренды

EPOX EP-3S1A, Руководство пользователя

Результаты поиска

Содержание EP-3S1A

Отзывы:

Похожие инструкции для EP-3S1A

Бренды по названию

Популярные бренды