Introduction
13
English
2-5 Power-On/Off (Remote)
This board has a 24-pin ATX and a 4-pin ATX12V power supply connector to support power
supplies with
Remote On/Off
feature. The 4-pin ATX12V connector must be plugged in for the
system to operate safely. The chassis power button should be connected to the mainboard front
panel PW_ON header.
You can turn off the system in two ways: by pressing the front panel power On/Off button or using
the "Soft Off" function that can be controlled by an operating system such as Windows
®
XP/ME/
2000/98.
Note:The board requires a minimum of 400 Watt power supply to operate. Your system configuration
(amount of memory, add-in cards, peripherals, etc.) may exceed this minimum power requirement.
To ensure that adequate power, use a 550 Watt (or higher) power supply and recommend to
use PSU that have 12V current total of (>=) 20A.
PW-ON
Case (chassis) Power ON/OFF button (PW-ON)
12V 4-pin
24-pin
