
1
Introduction
Chapter 1
Introduction
1-1 Product Specifications
r
r
r
r
r
Processor
- Supports Slot-1 Intel processors up to750MHz
- Universal Slot 1 socket with retention mechanism for SEPP, SECC and SECC2
- High efficiency Switching Power Module (VRM v8.4 compliant)
- Supports 66/100/133
MHz system clock speeds
- Innovative SeePU technology (software CPU installation with no jumper
settings)
Advanced over-clocking capability with Vcore and frequency subtle
tuning technology.
r
r
r
r
r
Chipset
- VIA 82C686A two chip PCIset
r
r
r
r
r
DRAM Memory
- Three 3.3V 168-pin DIMM sockets support up to 768MB
- Supports Sync. & Asyn. Host memory clock scheme
- Provides single-bit ECC capability
r
r
r
r
r
Expansion Slots
- One AMR slot (Rev 1.0 compliant) for cost effective modem riser
- One Universal-AGP slot for both 2XAGP and 4XAGP at 3.3v or 1.5v (Rev 2.0
compliant)
- Five 32-bit PCI slots (Rev 2.2 compliant)
- One 16-bit ISA slot (with sharing slot)
r
r
r
r
r
BIOS
- Award System BIOS, supports PnP, APM, DMI,ACPI & Multi-device booting
features i.e. floppy, LS120, CD-ROM, HDD(IDE, SCSI), ZIP-ATAPI etc.
- Includes Trend ChipAway Virus protection for virus-free boot and virus free
operating system
The Trend ChipAway Virus is a rule-based anti-virus technology and
does not require periodical updates of virus code
r
r
r
r
r
Embedded Ultra DMA-66 PCI IDE controller
- Supports two IDE ports up to 4 ATAPI devices
- Supports up to PIO Mode 4 up to 16.6MBps, Multi Mode 4 up to 66MBps
with bus mastering
@