12
4.7
EVENT NOTIFICATION
Notification is done by sending SMS to all authorized users.
By default, the device notifies about information erasing and power supply
status changes.
The following settings are default. GSM module reprogramming is possible
when necessary or when SIM card is changed. The reprogramming guide is
included on a CD. The basic reprogramming guide is presented below in
section 2.3 “GSM module software configuration”.
Triggered by a key
After erasing the information on all the protected HDDs, the device sends the
following messages to all the authorized users:
<<time>>
КЛЮЧ ON
where
<<time>>
is the erasing triggering time;
КЛЮЧ ON
is the key triggering report.
Triggered by a wired button
After erasing the information on all the protected HDDs, the device sends the
following messages to all the authorized users:
<<time>>
ВН.КНОПКА ON
where
<<time>>
is the erasing triggering time;
ВН.КНОПКА ON
is the wired button triggering report.
Triggered by a wireless button
After erasing the information on all the protected HDDs, the device sends the
following messages to all the authorized users:
<<time>>
РАДИО_БР ON
where
<<time>>
is the erasing triggering time;
РАДИО_БР ON
is the wireless button triggering report.
Triggered by a GSM module
After erasing the information on all the protected HDDs, the device sends the
following messages to all the authorized users:
<<time>>
ВЫХОД УНИЧТОЖЕНИЕ ВКЛ
where
<<time>>
is the erasing triggering time;
ВЫХОД УНИЧТОЖЕНИЕ ВКЛ
is the GSM module triggering report.
Triggered by a chassis intrusion sensor
After erasing the information on all the protected HDDs, the device sends the
following messages to all the authorized users:
<<time>>
КОРПУС ОТКРЫТ
where
<<time>>
is the erasing triggering time;
КОРПУС ОТКРЫТ
is the chassis intrusion sensor triggering report.
