
Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm
water using a ‘wrung-out’ sponge or cloth. Wipe completely dry before replacing the shelves
and bottle rack. Clean the exterior of the unit with a damp cloth.
If you require more information refer to the Cleaning section.
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the unit.
• Before Turning On!
Do not turn on until two hours after moving the unit. The coolant fluid needs time to settle.
Before Using Your Unit
Before placing any wine in the unit, turn it on and wait for 24 hours, to make sure it is working
properly and to allow it time to fall to the correct temperature. Your unit should not be
overfilled.
6. Turn the door 180° and re-install it to the
unit.
5. Install the left bottom hinge and left top
hinge on the unit.
180˚
7. Check that the door is aligned horizontally
and vertically and that the seals are closed
on all sides before finally tightening the left
bottom hinge (2 screws).
16
INSTALLATION
GB
EIWC7B1C16E_IB_5L_160629_grace.indb 16
29/6/16 7:58 pm