http://lighting.epoch-optic.com
LED
一體式吸頂燈安裝說明書
(
吸頂式
http://www.lighting-epoch.co.en
02-1005171.T1
http://www.lighting-epoch.co.en
Ceiling lock hole
Preliminary hole A
Outlet hole
Preliminary hole B
Outlet hole
2
3
1
Anchor
x 4
1
2
Washer
x 4
4
Close end connector x 3
Anchor allocation distance
910mm
Accessories for Surface-Mounted type
3
5
Wing nut x 1
4
T-accessory x 1
6
Carriage bolt x 1
7
Machine Screw x 1
Accessories for Corner Installation (Only for U-type, additional purchase)
1
3
2
Swing pipe lock hole (690mm)
Anchor x 2
Self-tapping screw x 2
Washer x 2
(Applicable for solid wooden
panels or wooden angle bars
that are above 20mm thick, or
solid cement walls and brick
walls)
Self-tapping screw x 2
(Applicable for solid wooden
panels or wooden angle bars
that are above 20mm thick, or
solid cement walls and brick
walls)
holder
light source
1234mm x 85mm x 48mm
1230mm x 100mm x 41.2mm
Type
dimension
It is recommended that installation should be performed by professionals or certified electricians; and ensure that the power
is turned off during installation, maintenance, and cleaning.
Do not remove the warranty and manufacture labels, nor disassemble, repair, or modify the luminaire.
Please ensure that the luminaire is complete and intact, and wires are not damaged nor broken before installation. In
addition, please do not connect the luminaire with other electrical equipments in series.
Please mind the sharp angles around the luminaire, and ensure that the luminaire is installed firmly to prevent it from falling
and causing injuries.
Wipe the luminaire gently by soft cloth without any solvent when performing cleaning tasks to prevent the luminaire's surface
from scratching or damaging.
Please use the original carton provided when performing storing and delivery tasks; don’t drop or place heavy objects on it.
Simple troubleshooting
Please contact the distributor for customer
service.
Please contact the distributor for customer
service.
Problem
Luminaire fails to
light up.
Luminaire lights
does not light up at all.
Troubleshooting
Switch on the power.
Ensure all wires are properly connected.
Possible causes
Power is not on.
Power cord is not
properly connected.
Luminaire or LED driver
malfunction.
LED light source malfunction.
Simple troubleshooting
This luminaire is for
indoor use only.
Input voltage must comply
with the range as specified
on the LED driver.
Operating temperature
range : -20
℃
~+40
℃
Storage temperature
range : -20
℃
~ +50
℃
Precautions
Precautions
Warranty
Warranty
1
、
Service: Under normal usage, if the product is found to be defective within its warranty period, please send the
product and the receipt back for repair.
2
、
The warranty is void if :
Incorrect voltage was applied to the product, or the product was installed improperly, or used in abnormal environment
/ under abnormal usage, or its precautions were not followed.
The product did not use the dedicated LED driver provided by us.
The product is repaired, modified, or altered in any way; or, the warranty and the manufacture labels were removed,
damaged, or unrecognizable.
The failure was caused by the buyer's misbehavior or carelessness during transportation, delivery, or storage process
after purchasing.
The failure was caused by natural disasters such as earthquake, or nibbles by mice or bugs etc.
The product was used or operated under special and harsh environments; for example, damp or sulphuric area,
seashore area, or on the ship, or other corrosive and erosive environments.
3
、
For further information regarding the product, please refer to our website or contact customer service.
Hole on luminaire diagram
Hole on luminaire diagram
Luminaire accessories and Anchor allocation position
Luminaire accessories and Anchor allocation position
Smiley™ Installation guide
(Mounted and corner installation)
epo
Smiley™ Installation guide
(Mounted and corner installation)
epo
Smiley
™
C type
Smiley
™
U type
