Have a question? Need a part ASAP? Call 1-800-589-7990 or email [email protected].
N
S
R
Q
P
P
P
P
P
Ro
tate
Rotate the ladder/safety rail assembly so the notches face the loft
bed and attach it to the loft using two 40mm bolts on short upright
L and two 40mm bolts on ladder upright K as shown.
Tighten with hex key.
**NOTE:
Left ladder
configuration
ladder assembly
should appear
as shown.
11
Locate the corkboard Q.
Make sure the spring loaded pins are at the top
of the corkboard.
Push the pins flush to the corkboard and insert
the corkboard into the grooved rails on the loft.
The corkboard may be positioned
anywhere on the grooved rails.
Locate the two storage units
R and S and the monitor
stand N and arrange them
on the desktop.
Be sure to periodically tighten loft hardware as it may loosen with usage and changing humidity.
13
Locate the three ladder steps P and position them as shown.
Insert four 100mm bolts
through the ladder upright
and end boards for each of
the three steps.
Tighten with
hex key provided.
Insert four barrel
nuts into each step.
12
K
L
14-Aug-2018
5/5
