EpiValley SXC-1280, Руководство пользователя

Страница: 4 / 48

5
▌
Prepare…to…install.
At first time before using your modem
device, you should connect your USB
modem to the PC. When you plug it to a
USB port, your system will detect it to a
virtual drive and a memory disk. If you don’t
see that, please check LED color of your
modem device. If it was green light, press
the button to switch memory device with
red light.
The mass storage driver is installed
automatically. You can start installation by
“Auto Run” or clicking “Setup.exe” in the
USB Memory folder.
▌Installing Speed Access Manager
Speed Access Manager refers to the dialer
client of USB modem, which is expressed
SAM.
1. Plug the USB modem to a USB port.
2. When the first screen appears, click the
“ Installation ” icon to start the installation
wizard.
3. Clicking “ User…Manual ” or “ Quick…Guide…
&…Trouble…Shooting ” icon in the first
screen will prompt you to “ Open ” or
“ Save ” the Manual. Click “ Open ” to see
the Manual or click “ SAVE ” to save the
Manual into your PC.
Installing…Software…………………………………………………………………………………………………………………… Parts…of…the…USB…Modem
Front…View
USB Cap
LED Indicator
/ Switch
USB Connector
Rear…View
Side…View
Earphone port
UIM Slot
LED Green Yellow Red
Normal Good signal Booting or
Error
Memory storage
status
Blinking Data connecting No signal Using on memory
storage
RF Test port
(Do not open
this cap)
* The color of the products shown in this manual
is the standard color and may be different from
that of the products sold.