Episode IC-6, Руководство по установке

Страница: 2 / 8

page | 2
www.snapav.com Support 866.838.5052
INTRODUCTION
Thank you for purchasing Episode® speakers. Complete the Setup,
Connect, Secure, and Fine Tune sections in this manual to ensure proper
installation. Visit our website for design recommendations and speaker
calculators.
SETUP
New Construction Install
Episode speaker installations can be simplified by using Episode
pre-construction brackets (sold separately). Install them prior to drywall
to allow for precise placement of the speaker.
Secure the wiring within reach of the bracket for easy access.
Existing Construction Install
Make a cutout for the speaker using the supplied template. Allow space
for the bezel if installing near adjacent objects, or cut the hole in two steps
as shown below.
1.
Cut the drywall at a 45° angle so that if the
speaker is too close to an obstruction, you
can easily ‘plug’ the hole.
2.
If there are no obstructions, cut the drywall
again, this time at a 90° angle.
3.
Insert the speaker into the cutout.
www.snapav.com Support 866.838.5052
OBSTRUCTION
PLUG