Episode ES-TERRAIN-SAT-2.0, Руководство по установке

Страница: 5 / 12

page | 5
© 2018 Episode®
Speaker Wire Recommendations
We recommend that you high-quality stranded speaker wire. Connect the left and
right wires from the AV receiver or amplifier directly to the corresponding left and
right binding posts on the speaker.
Use burial-rated wire for all installations. For maximum performance:
• For runs up to 100 feet, use 16ga wire or better.
• For runs up to 200 feet, use 14ga wire or better.
• For runs up to 300 feet, use 12ga wire or better.
You can use smaller wire gauges, but performance degrades depending on gauge
and distance. The chart below shows the signal loss that you can expect on a
typical run based on gauge and distance.
Wire Gauge
Single Subwoofer Dual Subwoofers
21% Power Loss 21% Power Loss
12 622 ft. 311 ft.
14 403 ft. 199 ft.
16 255 ft. 128 ft.
18 194 ft. 92 ft.
NOMINAL IMPEDANCE CHART
4.1 8 ohm
6.1 6 ohm
8.1 4 ohm
4.2 4 ohm
6.2 3.5 ohm
8.2 3 ohm
NOTE:
Following the wiring recommendations for The Terrain system creates a
nominal impedance on a standard multichannel or 2 channel amplifier. The chart
above outlines the expected impedance per the system configuration.