Episode ES-SUB-ELE10-450, Руководство по установке

Страница: 7 / 16

page | 7
© 2018 Episode®
MAKING SYSTEM CONNECTIONS
Wiring Recommendations
For line-level connections, use high-quality, low impedance RCA cables with adequate shielding and high-quality
connectors.
Use two-conductor loudspeaker cable for high level connections that is appropriate for the installation environment
and wire length.
Audio Connections
To provide signal to the ELE subwoofer, a connection must be made from the audio source or speaker wiring. Most
home theater AV receivers and sources supply an “LFE” output for subwoofers that should be used if available.
Stereo line or speaker-level inputs from sources or speaker wiring may also be used.
CAUTION! DO NOT connect to both the line and speaker level connections at the same time. Use only line-level
connections, or only speaker-level connections.
Line-Level RCA Connections
!
WARNING! Do not connect to both the low-level RCA and high-level speaker connections. Use only one
connection method.
Optional Loop out to more subwoofers
Use same connection type as input (LFE or
L/R)
AV Receiver/Processor
RCA Outputs
LS
RS
SUB
CEN
L
R
LR RR LF CF RF
Speaker Outputs
Left & Right
Preamp Out
LFE/
SUB Out
OR
100-120V 220-240V
POWER
HIGH LEVEL
CROSSOVER
PHASE
VOLUME
STATUS
LFE
LOW LEVEL
AUTO
OFF ON
IN
IN
L
R
OUT
OUT
ES-SUB-ELE8-250
Designed and Engineered in USA
Manufactured in China
50 LFE
0 ˚ 180 ˚
100
MIN MAX
100-120V~60Hz 1.6A /
220-240V~50Hz 0.8A
DC 5V /500mA