epiphan Pearl-2 Rackmount, Руководство пользователя

Страница: 341 / 497

Pearl-2 User Guide Stream using multicast
Stream using multicast
A multicast stream consists of one stream distributed to many viewers via a multicast-capable network. You
are only able to broadcast to one multicast network at a time, but you may broadcast to a multicast network
and any number of non-multicast CDNs.
Pearl-2 supports multicast streaming content to an IP TV or a set-top box playlist when the stream format is
MPEG-TS. You may only stream to one multicast network at a time.
Note that only one multicast network may be used simultaneously. So if you select MPEG-TS
UDP push , MPEG-TS RTP/UDP push or RTP/UDP push , you are not able to select any of the
others, and you must delete the stream to select a different multicast network. Adding, removing,
or changing the settings for any of these three multicast publishers stops any current streaming
or recording session.
Topics include:
l
MPEG-TS streams using RTP/UDP push
l
MPEG-TS streams using UDP push
l
Multicast streaming using RTP/UDP
MPEG-TS streams using RTP/UDP push
Before configuring your channel for MPEG-TS streaming, ensure the following codecs are configured:
l
Video – H.264
l
Audio – MP3 or AAC, if audio is configured.
To configure your channel for MPEG-TS using RTP/UDP push:
1. Login to the Admin panel as admin , see Connect to the Admin panel .
2. From the Channels menu, select a channel and click Streaming . The Streaming configuration page
opens.
3. Click New stream and select MPEG-TS RTP/UDP push .
328