![background image](http://html.mh-extra.com/html/epiphan/livescrypt/livescrypt_user-manual_2417799020.webp)
LiveScrypt User Guide
Connect audio sources and check levels
Now you can connect the AC power adapter and power on. The LiveScrypt device should automatically
connect to the network. You will see a device pairing code on the touch screen.
Your network must have access to the Internet for LiveScrypt transcription to work, plus the
required network ports must be open with read/write privileges. Contact your IT administrator if
you're not sure.
The following network ports must be open with read/write privileges for LiveScrypt to function properly:
l
Port 22
- SSH used for remote support (TCP).
l
Port 80
- used by the local web admin page (HTTP).
l
Port 123
- used for NTP time synchronization (TCP/UDP).
l
Port 443
- used to communicate with the LiveScrypt cloud transcription service (HTTPS).
For more information about network settings or assigning a static IP address, see
Connect audio sources and check levels
The LiveScrypt device accepts multiple audio sources from cameras, digital mixers, and microphones.
Embedded audio from SDI, HDMI, and USB (UVC) video sources are extracted. A single, combined mono
signal is sent to the cloud for transcription.
15