![background image](http://html.mh-extra.com/html/epiphan/lecture-recorder/lecture-recorder_install-manual_2417804025.webp)
1. Installation and Getting Started
Connecting to the VGA Recorder Web admin interface
Install Guide
Page 25
Connecting to the VGA Recorder Web
admin interface
Now that you have the VGA Recorder IP address (from the
Network Discovery Utility), users can use this IP address to view
or work with the files recorded by the device. Users on the
internal Local Area Network (LAN) can use the following steps to
view the VGA Recorder Web admin interface. Users can connect
to the Web admin interface as an administrator or as a viewer.
Note:
You can always log into the VGA Recorder Web admin
interface by browsing to the default VGA Recorder IP address,
which is
http://192.168.255.250
. To log into the VGA Recorder
using this IP address, you must set your PC to use the static IP
address 192.168.255.249 and netmask 255.255.255.252. Then open
a Web browser and browse to
http://192.168.255.250
.
To log into the Web admin interface as an administrator
1
Start any web browser.
2
Browse to the IP address of the VGA Recorder device.
For example, if the IP address of the device is 192.168.23.45
then browse to:
http://192.168.23.45/admin
3
Enter the following:
User Name:
admin
Password:
(no password required)
The Web admin interface opens displaying the Video Archive.
Figure 14
shows the Web admin interface. When
administrators first login they will see a similar page.