ProGrabbers User Guide
Configuration options
Setting
Default
Value
Description
*On Windows, some video graphics cards may prevent this
feature from working.
To configure any of these options:
1. Connect your KVM2USB 3.0
directly
to a USB port on your host computer. (Using a dock or splitter is
not supported.)
2. Launch
KvmApp.exe
.
3. Click
Options > Configuration tool...
, the Capture config tool opens.
4. If you have more than one KVM2USB 3.0 connected to your host computer, select the KVM2USB 3.0
you wish to configure.
5. Select the
Settings
or
User Modes
tab and make your adjustments. For user modes, check the check
box for the modes you wish to have active.
6. Click
Apply
and wait at least 5 seconds before disconnecting KVM2USB 3.0 or closing the Capture
Config Tool.
7. Close the Capture Config Tool when you've completed your changes.
23