epiphan video Pearl Nano, Руководство пользователя

Страница: 4 / 484

What's new in release 4.14.2?
Firmware 4.14.2 adds the new MultiViewer feature so you can display a custom mix of video sources including the
channel on the HDMI output port in a side-by-side grid for confidence monitoring with minimal impact to the
system's processor. And we've added a pause feature to Panopto Content Management System (CMS) event
recording and webcasting. We also added some other new features and made performance enhancements.
Firmware 4.14.2
MultiViewer
MultiViewer displays a custom mix of up to two video sources including the channel on the HDMI output port in a
side-by-side grid for confidence monitoring with minimal impact to the system's processor.
Pause and extend CMS events
We made it simple to extend your CMS event in 5, 10, or 15 minute intervals right from the front screen. Plus you
can now pause a Panopto CMS event with the option to mute the audio and display an "event paused" image for
as long as the event is paused.
Live channel RTSP stream transport option
We added a new RTSP (TCP) transport protocol option that advertises only TCP as the transport for RTSP. This is
useful if you're network connection is lossy and would benefit from the error-checking and packet-loss
retransmission that TCP performs.
Keyboard shortcuts
To make the local console and the built-in keyboard easier to use, we added some keyboard short cuts.
What changed in this release
User account passwords
To comply with recent security mandates, you're now required to assign a password to the admin, operator, and
viewer user accounts the first-time you log in to the Admin panel. If you upgrade Pearl Nano to firmware 4.14.2
and no passwords are currently assigned to the user accounts, you're prompted to set passwords when a factory
reset or default configuration preset is applied. However, we recommend assigning passwords to the user
accounts as soon as possible for greater security.