Pearl Mini User Guide
Resize and position items using percents or pixels
Using pixels
If you need to specify an exact amount in pixels (rather than percent) you can type a pixel value in any of
the positioning value squares followed by the characters px (e.g. 56px). You can mix and match pixels and
percents changing only the boxes you want to use pixel values. At any time you can switch back to
percents by typing a percent. See
Resize and position items using percents or pixels
for more information.
Audio source selection and saving edits
Select audio source(s) for your channel by adding them to your layouts. The bottom section of the custom
layout editor is where you select the audio source for the currently selected layout. It's also where you'll
find the
Save
button.
l
Pearl-2, Pearl Mini, and Epiphan Unify
- If a layout doesn't have an audio source selected, there
will be silence when that layout is selected during live switching, recording, and confidence
monitoring.
l
Pearl Mini
- HDMI-A and HDMI-B audio are already selected by default for the two default
channels.
You can have multiple audio sources in a layout. The audio sources are mixed together at the same
volume level as one another.
If multiple audio sources in a layout have common audio signals, the common signals are
added together, which amplifies the volume of the common signals in comparison to the rest
of the audio that's coming from your sources. For example, if you connect two microphones
that are set up in close proximity to each other and their signals are in phase, or if you
connect stereo music left/right signals to the mono audio ports (mic or line) on Pearl Mini.
When setting the audio gain for your channel, add all your audio sources to your layout first, then set level
of gain for your audio sources appropriately. When you're done all your changes, click
Save
.
Resize and position items using percents or pixels
You can resize layout items using the percent/pixel adjustment boxes in a layout using the custom layout
editor. You can also reposition video sources. See
and
.
There are three adjustment boxes along your layout's horizontal axis and another 3 boxes along the
vertical axis. You can enter
percent or pixel values
into checked adjustment boxes (bordered with red)
to position and resize your item(s).
241
