epiphan video Pearl-2, Руководство пользователя

Страница: 124 / 583

Pearl-2 User Guide Verify IP address and MAC address of Pearl-2
In addition to the incoming ports, Pearl-2 uses some outgoing connections as follows:
l
Port 80 - used for firmware update checks and downloads.
l
Publishing/streaming port - the actual ports used for streaming to a server depends on the server
and protocol used. See Streaming to servers, CDNs, and other devices
l
AFU file recording transfer port - the actual ports used for AFU depends on your configuration. See
FTP and automatic file transfers .
Verify IP address and MAC address of Pearl-2
There are two ways to view the current IP address and MAC address of Pearl-2:
l
From the Network configuration page using the Admin panel.
l
From the Settings menu using the touch screen on Pearl-2.
Table 20 Network Information
Item Description/Options
MAC Address
A media access control address (MAC address) is a unique identifier for the
network interface. The value is read-only and cannot be changed. You may need
to share this value with your system administrator.
Current IP Address
Reflects the current internet protocol address (IP address) of the system. This
value is either obtained from the DHCP server (if using DHCP) or is the configured
static IP address. Pearl-2 supports IPv4 addresses. It does not support IPv6
addresses.
View network information using the Admin panel
1. Login to the Admin panel as admin , see Connect to Admin panel .
2. From the Configuration menu, click Network . The network configuration page opens.
110