CONNECTING TO TIMETEC SECURITY MOBILE APP
1. Download and install TimeTec Security Mobile App from Apple App Store or Google Play.
2. Register an account with TimeTec Security and activate it.
3. Sign in to TimeTec Security Mobile App.
4. Connect your smartphone to a WiFi.
5. Power on your camera with a power adapter. Red LED of Indicator Light 1 will lit up to indicate
that the camera is booting. Wait until the LED turns green. Next, connect the IP Camera to the
same WiFi access point used at your smartphone. Make sure you only use one WiFi Access Point
during configuration.
6. Open TimeTec Security App, go to Epicamera > Live View > Tap the ADD button.
7. Scan the QR code at the IP Camera (or you can find it at the packaging box) to get the serial
number, or tap MANUAL INSERT to fill in the serial number.
8. Name the IP Camera, insert username (default: admin), password (default: admin) and WiFi
password.
9. Done. You will be able to view the IP Camera added in the Camera Listing. You can continue to
set the recording rules in the mobile app.
NOTE:
Please make sure that the installation
surface can support at least 3 times the weight
of the camera and the bracket.
STEP 1:
Drill holes on the installation surface (wall or ceiling).
STEP 2:
Open accessories packet, take out expansion bolt and insert it into the hole.
STEP 3:
Open accessories packet, take out installation screws. Tighten the screws to fix the
device on the installation surface (wall or ceiling). Adjust the device sunshade back and forth
as necessary. When you have fixed the device, tighten the screws on sunshade.
STEP 4 :
Plug external wiring of the device properly.
STEP 5 :
Use cross screwdriver (from accessories
packet) to loosen the screw for adjustment.
STEP 6 :
Adjust the device in all possible
directions, and set its monitoring
direction accordingly.
STEP 7:
Use cross screwdriver to
tighten the screws.
DISCLAIMER
• This quick start guide is for reference only. Minor difference might be found in user interface.
• All the designs and software here are subject to change without prior written notice.
• All trademarks and registered trademarks mentioned are the properties of their respective owners.
• Please visit our website or contact your local service engineer for more information.
• If there is any uncertainty or controversy, please refer to our final explanation.
Installation Surface
Expansion Bolt
Installation Screw
Device
Locking Screw
DEVICE INSTALLATION
NOTE:
• If you have
more IP Camera,
please follow Step
5-8 to add them
one by one. • If you
want to change
the WiFi signal,
please reset the
camera to factory
default and repeat
Step 4-9 to add the
device.
