Unit device
Ethernet port
Power port
w w w . e p i c a m e r a . c o m
Quick Start Guide
©
2018
Timetec Cloud Sdn Bhd. All rights reserved • 042018
Epicam E17S
Smart Camera
PRODUCT APPEARANCE
Please refer to the following pictures for
more details regarding each port.
QUICK START GUIDE
Device ×1
Quick Start Guide ×1
Screw Packet ×1
Power Adapter ×1
Network Cable ×1
Waterproof Connector ×1
WiFi Antenna x 1
(for WiFi model only)
1
2
3
4
5
6
7
1
2
3
4
5
6
Locking screw
Reset/ WPS
button
(WiFi Protected Setup)
Indicator
light 1
Lower
cover
Micro SD
card slot
Indicator
light 2
Waterproof ring
(WiFi Protected Setup)
WiFi antenna
(for WiFi model only)
NOTE:
1. For PoE model device,
please DO NOT apply
PoE power and DC
power to the device at
the same time. Use
only ONE power
source at a time.
2. For WiFi model device,
please apply only DC
power to the device.
3. To reset, long press for
8 seconds until light
off; For WPS (WiFi
Protected Setup), a
quick press will suffice.
CAMERA & ACCESSORIES
7
Please refer to the following table for more details about indicator light status.
DEVICE STATUS
Booting
Booting completed, awaiting WiFi
config, enter smart config status;
WiFi smart config in progress,
including WPS (WiFi Protected
Setup), management frame, etc.
WiFi connection succeeded,
operating normally.
Device upgrade
Network disconnected
Device fail to boot up; alarm or SD
card does not work
INDICATOR LIGHT STATUS
Red light stably on
Green light slow flashing
Green light quick flashing
Green light stably on
Red and green lights flash alternately
Red light slow flashing
Red light quick flashing
