Full-size or Queen-size Grid Mainframe
Page 6 of 7
Step 7 Attach Mattress Retainers
Note: If you are using the Perfect® Sit & Sleep Cover,
DO
NOT ATTACH THE MATTRESS RETAINERS (O);
skip this step 7
need picture of mattress retainers
1. Insert the Left & Right Mattress Retainers (O) from the top of the
front edge of the Seat Section (C) as described in the diagram.
Note: Mattress Retainers (O) stick up above the Seat Section (C).
2. Using the Small Silver Washer (V), then the Small Lock
Washer (W), then Small Nut (T), tighten with Open Wrench (K).
3. Repeat for 3 remaining bolts.
Step 8 Attach Rubber Pads
Note: The purpose of the Rubber Pads (M) is to prevent
metal on metal wear and tear and minimize noise.
1. Convert the frame to the Bed Position (see page 6 for
instructions on how to convert your frame to the Bed Position).
2. Attach the four Rubber Pads (M)
to the top of the
Stretcher Rail (E)
at the four points where the Seat and
Back Sectionis (C & D) touch the Stretcher Rails (E).
Diagram shows placement for the Right side Seat Section.
Repeat for the other three points including the Left side Seat
Section, Left side Back Section, and Right side Back Section.
(you must provide a valid order #)
DO NOT RETURN PRODUCT TO YOUR RETAILER
Contact Technical Support
24/7 email: [email protected] (reply within one business day)
Video Assembly Instructions … www.youtube.com/epicfurnishings
Assembly
Instructions
