Full-size or Queen-size Grid Mainframe
Page 4 of 7
Step 4 Assemble Seat and Back Sections
of both the Seat & Back Sections (C,D) as shown in the diagram
Step 5 Attach Seat and Back Sections to Hinges
Note: To identify Seat Section (C) from Back Section (D),
Seat Section (C) has 4 holes along the front edge.
(to be used for the Mattress Retainers (O) described in Step 7)
1. Attach Seat Section (C)
WIRE RODS UP
, to the front part of the Hinge
using a Longer Bolt (G), then Seat Section (C), then Hinge,
then a Large Silver Washer (H), then a Large Lock Washer (N)
and then screw the Large Nut (I) from the bottom of the
Hinge.
TIGHTEN LOOSELY
. Repeat for the second hole.
2. Repeat step 1 for the Right side of the Seat Section (C).
During shipment hinges may get compressed. If Seat
Note: Wire Rods Up.
Section does not easily reach the Right Hinge (B), simply
pull hinge and Seat Section (C) together to decompress hinge.
3. Repeat steps 1 and 2 for the Back Section (D) except
attaching to the back portion of the Hinge.
4.
DO NOT TIGHTEN
the 8 Longer Bolts (G) yet.
DO NOT RETURN PRODUCT TO YOUR RETAILER
Contact Technical Support
24/7 email: [email protected] (reply within one business day)
(you must provide a valid order #)
Video Assembly Instructions … www.youtube.com/epicfurnishings
Assembly
Instructions
1. Assemble Seat & Back Sections (C,D), unfold each.
2. Insert one Shortest Bolt (S) into the center front edge
