22
HOW TO TURN ON THE POWER
IMPORTANT: If the elliptical has been exposed to
cold temperatures, allow it to warm to room tem-
perature before you turn on the power. If you do
not do this, you may damage the console displays
or other electrical components.
Plug in the power cord (see
HOW TO PLUG IN THE
POWER CORD on page
18). Next, locate the
power switch on the frame
near the power cord. Press
the power switch to the
reset position.
The display will then turn on and the console will be
ready for use.
Note: When you turn on the power for the
rst
time, the incline of the ramp may calibrate auto-
matically.
The ramp will move upward and downward
as it calibrates. When the ramp stops moving, the ramp
is calibrated.
IMPORTANT: If the ramp does not calibrate auto-
matically, see HOW TO CALIBRATE THE RAMP on
page 33 and calibrate the ramp manually.
HOW TO SET UP THE CONSOLE
Before using the elliptical for the first time, set up the
console.
1. Create an iFit account.
To create an iFit account, or for more
information about the account, go to
www.iFit.com.
2. Connect to your wireless network.
Note: In order to download iFit workouts and use
some other features of the console, you must be
connected to a wireless network. See HOW TO
CHANGE CONSOLE SETTINGS on page 29 to
connect the console to your wireless network.
3. Check for firmware updates.
See HOW TO CHANGE CONSOLE SETTINGS on
page 29 and check for firmware updates.
4. Calibrate the incline of the ramp.
See HOW TO CALIBRATE THE RAMP on page
33 and calibrate the incline of the ramp.
The console is now ready for you to begin working out.
The following pages explain the various workouts and
other features that the console offers.
To use the manual mode,
see page 23.
To use
an onboard workout,
see page 25.
To use a
set-a-goal workout,
see page 26.
To create a
user-defined workout,
see page 26.
To use a
user-defined workout,
see page 27.
To use an iFit
workout,
see page 28.
To change console set-
tings,
see page 29.
To use the sound system,
see
page 31.
Note: If there is a sheet of plastic on the display,
remove the plastic.
Note: The console can display distance in either miles
or kilometers. To find which unit of measurement is
selected, see page 29.
Reset
Position
