6
List of Acceptable Media for Fire Features
Lava Rock (or other Igneous Rock) NO LARGER THAN 2” in diameter
Fireglass approved for use in fire features
Manmade stone for use in fire features (Refractory Material)
Installation Note
The use of media inside fire features is recommended due to the fact it enhances the look of the fire
feature but also improves its performance by forcing the gas emanating from the burner to mix as it
passes through the media. This ‘mixing’ of gases creates an even flame throughout the feature and
helps spread the flame from the Pilot Burner throughout the burner quicker than when there is no
media.
Recommended thickness of the media above the burner element is NO MORE than 2”
.
Due to the fact the Pilot Burner must be partially exposed to oxygen in order to ignite the pilot flame
during startup DO NOT COMPLETELY COVER THE PILOT BURNER. When installation of the
media is complete the top of the Pilot Burner Protective Cover should be visible.
Operation
Fire Feature Start Up
1. Prior to turning appliance on visually inspect fire feature to ensure debris such as leaves or other
combustible material has not collected inside the feature which could burn and emit embers once the
fire feature is turned on. Also ensure any person standing close to the fire feature is aware you will be
turning the fire feature on prior to actually turning it on.
WARNING
Do NOT use this appliance if any part has been under water.
Immediately call a qualified service technician to inspect the appliance and to replace
any part of the control system and any gas control which has been under water.
WARNING
HOT – DO NOT TOUCH - SEVERE BURNS MAY RESULT - CLOTHING IGNITION MAY RESULT
-
CAREFULLY SUPERVISE children in same area as the appliance.
-
Alert children and adults to hazards of high temperatures.
-
Clothing or other flammable materials should not be hung from the appliance or placed on or near the
appliance.
WARNING
The appliance should be inspected before use and at least annually by a qualified service technician.
Any guard or protective device removed for servicing must be replaced prior to operation.
Keep the appliance area clear and free from combustible materials, gasoline and other flammable vapors and liquids.
