EPH Controls IMC, Инструкция по установке и эксплуатации

Страница: 7 / 28

5
Immersion Controller
The IMC is supplied with its own surface mounting box, which can be mounted over
a single or double gang flush wall box. It should not be mounted on an unearthed
metal surface.
An immersion heater must have its own radial circuit.
This should be protected by a 16 Amp RCBO.
Mounting & Installation
Caution!
ƒ Installation and connection should only be carried out by a qualified person.
ƒ
Only qualified electricians or authorised service staff are permitted to open the controller.
ƒ If the controller is used in a way not specified by the manufacturer, its safety may be impaired.
ƒ Prior to setting the controller, it is necessary to complete all required settings described in the section.
ƒ Do not use sharp tools to push any button
ƒ WARNING!
Isolate mains supply before commencing installation and ensure the unit is properly earthed