Epever IP1000-11-Plus, Руководство пользователя

Страница: 6 / 52

2

When installing the inverter, you must evaluate whether any arc danger exists in the operation area.

The inverter needs to be connected to a battery. The battery's minimum capacity (Ah) is
recommended to be five times the current equals the inverter's rated output power divided by the
battery voltage.

Keep the inverter out of reach of children.

This inverter is an off-grid type. It is strictly prohibited to connect the inverter to the grid; otherwise, it
will be damaged.

This inverter is only allowed for stand-alone operation. It is prohibited to connect multiple units in
parallel or series; otherwise, the inverter will be damaged.
5. Safety cautions for mechanical installation

Before installation, make sure the inverter has no electrical connection.

Ensure enough heat dissipation space for the inverter before installation. Do not install the inverter
in a harsh environment such as humid, greasy, flammable, explosive, or dust accumulation.
6. Safety cautions for electrical connection

Check whether all the wiring connections are tight to avoid the danger of heat accumulation due to
loose connections.

The protective grounding must be connected to the ground. The cross-section of the wire should not
be less than 4mm
2

The DC input voltage must strictly be following the parameter table. Too high or too low DC input
voltage will affect the inverter's normal operation and damage it.

It is recommended that the connection between the battery and the inverter be less than 3 meters. If
greater than 3 meters, please reduce the current density of the connection wire.

A fuse or breaker should be used between battery and inverter; the fuse or breaker's rated current
should be twice the inverter rated input current.

DO NOT install the inverter close to the flooded lead-acid battery because the terminals' sparkle
may ignite the hydrogen released by the battery.

The AC output terminal is only for the load connection. Do NOT connect it to other power sources or
utilities; otherwise, the inverter will be damaged. Turn off the inverter when connecting loads.

Do not connect battery chargers or similar products to the inverter's input terminal; otherwise, the
inverter will be damaged.
7. Safety cautions for controller operation

When the inverter is working, the shell will generate a lot of heat. The temperature is very high;
please do not touch it.

When the inverter is running, please do not open the cabinet.

The inverter's AC output is of high voltage, do not touch the wiring connection.