23
Work Log Query
From 2012-01-01
To 2012-06-08
Total
：
79
No. 1/79
2012-01-01 00:00
Batt Volt 13.3V
Batt Cur 0.0A
Alarm Log Query
From 2012-01-01
To 2012-06-08
Total
：
10
No. 1/10
Batt OVD/Begin
2012-01-04 14:20
Para 17.20V
<1>Work Log
<2>Alarm Log
<2>Alarm Log
<1>Work Log
Press
to enter the
Log Info
interface when the inverse cursor point to item.
Press
button to exit. Work Log and Alarm Log could be browsed in this
interface, the operation is as follows:
Press
to enter the
Work Log
or
Alarm Log
interface respectively when the
item is chosen in inverse. Press
again to enter the Edit Mode. Use
or
button to move the cursor between the time parameters and data bit. Use
button to modify the value and set the period of log for browse. When
the period is set, press
to enter the corresponding details.
Log Number, time, the voltage and current of battery are included in every
work log item and are shown in the Work Log interface.
Warning event sequence number, warning event, start or end time, the fault
status and values are all included in every alarm Log item and are shown in the
Alarm Log interface.
Clock Set
The interface of Clock Set is shown as follow:
Press
to enter the Clock Set interface when the inverse cursor point to
Clock Set
item. Press
button to exit.
Date and Time can be adjusted in this interface. Press
and input the 6 digit
user password and then Date and Time could be adjusted. The format of date
is YYYY-MM-DD; the one of time is HH-MM-SS. When the set is over, press
Clock Set
Jan-01-2014
17:12:28
