Epever EG1200CU, Руководство пользователя

Страница: 28 / 32

has been damaged or not
and replace it in time when
connecting with battery.
The system has a recovery
function and needs to be
turned on again when
exceeding the recovery
time.
4 HMI displays
“OSCP”, Red and
Orange LED light on
solid;
Always buzzing;
Output termination. Output is short circuit
when working;
Output has short
phenomenon. Checking the output is
short circuit or not.
The system has a recovery
function and needs to be
turned on again when
exceeding the recovery
time.
5 HMI displays
“DOTP”;
Orange LED slow
blink;
Intermittent buzzing;
Output termination. Over temperature
protection;
Temperature of heat
sink is too high. The output will be
recovered automatically as
soon as the temperature
becomes lower.
6 In Power Mode:
HMI displays
“ONLP”; Red
LED is lighted on
solid;
Always buzzing;
Output termination. No load. In Power Mode:
The device will be shut off
automatically after 2s
when working in no load
status.
The device needs to be
turned on again after
troubleshooting.
7 HMI displays
“CFAL”; Orange
LED fast blink;
Intermittent buzzing Communication
failures. The device needs to be
turned on again when
communication failure
occurs.
-24-