ep EPT20-13ET, Руководство по эксплуатации

Страница: 25 / 38

19
– It is essential to follow the safety regulations of the battery and charging station
manufacturers.
Charging
Charging Charging
Charging step
step step
step
– Check whether the condition is
according with "Safety regulations for
Charging the battery".
– Park the truck securely(See 3.2.4
Parking the truck securely Page17 ).
– Remove the battery plug (1).
–
Connect the battery plug (1) with the
charging lead of the stationary charger (2)
and turn on the charger.
4.4Battery 4.4Battery 4.4Battery 4.4Battery removal removal removal removal and and and and installation installation installation installation
Park the truck securely(See 3.2.4 Parking the truck securely Page 17 ) and turn off
the power before removal and installation battery.
Battery removal and installation steps:
a: Remove two screw(1), take out the Cover.
b: Remove four screw(2).
c: Remove 3 battery cable(3) as shown in figure.
d:Rotary operating handle(4) to the extreme
position.
e: pull electrical panel(5) a little out.
f:
Turn the
electrical panel(5) to the direction
as shown in picture until it can't cover battery
at all.
W W W Warning arning arning arning
！
Well place cables to avoid be
damaged when you removal and
installation battery.