background image

In the manual, “equipment user” refers to any natural person or legal person directly using or 

appointing or authorizing others to use the carrier. In such special situations as renting or sales, 

the “equipment user” represents the interested parties supposed to bear operation obligations 

as specified by the contractual terms concluded between equipment owner and corresponding 

users. Equipment users must ensure the use of the carrier only for purposes specified and timely 

eliminate all the dangers that may threaten the life and health of the users themselves or any other 

third party, in addition to which they must also strictly abide by accident prevention provisions, 

other safety technology provisions and equipment operation, maintenance and repair guidelines, 

and ensure that all the operators seriously read and completely understand the contents of the 

operation instruction.

Should any violation of the operation instruction occur, the quality guarantee of our company will be 

invalid automatically, and our company will assume none of the responsibilities for losses resulting 

from any nonstandard operation of the equipment implemented by any client, equipment user or 

any third party without the authorization of the client service department of our company.

Any installation or retrofitting of any additional device that may influence or enhance the functions 

of the carrier must be approved by our company in writing beforehand.

Obligations and responsibilities of equipment user

Equipment refit

Содержание EPL151





































































Отзывы: