EP Equipment EPL151, Руководство по эксплуатации

Страница: 15 / 52

REV. 12/2019
6 B
2.Key switch B
Connect and interrupt the control
current.
•
When pulling out the induction key, the
control current of the truck will be interrupted;
• When inserting the induction key, the control
current of the truck will be connected.
Pulling out the key switch of a forklift
before leaving can prevent the forklift
from starting accidentally.
• LED (1) displays the r emaining charge;
• LED (2) displays remaining charge
percentage;
• LED (3) displays Interlock switch status
indication;
• LED (4) displays the total running time
normally. If fault, display the fault code.
1
2
3
4
70
％
EPL151
WPL201
i
NOTE
2.2.3 Display instrument
RPL201/RPL201H
• LED (1) displays the remaining charge.when
1st block and 2nd block blinks alternatively,
it indicates low power needs to be charged
• LED (2) displays remaining charge
percentage;
• LED (3) flashing, it indicates travel forward
properly;
• LED (4) flashing, it indicates travel backward
properly;
• LED (5) flashing, it indicates lifting properly;
• LED (6) flashing, it indicates lowering
properly;
• LED (7) always on, it indicates interlock
switch opened, LED(7) flashing, it indicates
interlock switch closed, the display start
timing.
• LED (8) displays the total running time
normally. If fault, display the fault code.