EP Equipment 508000003143, Руководство по эксплуатации

Страница: 54 / 91

47
114
SHELF WRONG
REQ. Height request under ‘0-SENSOR
POS MM’;
——
115
SHELF WAIT
HEIG.
"Shelf selector activation request
before the initialization of the height
measurement release sheld selectior request
and check the heifh
measuramente system
116 SHELF WR. INP:
"‘SHELF WR. INP: xx’ : Bit 0 of xx:
pick and place request bits both
actived or both not actived;
‘SHELF WR. INP: xx’ : Bit 1 of xx:
Changed pick and place request
bits or ‘height request’ during the
state machine sequence;
‘SHELF WR. INP: xx’ : Bit 2 of xx:
‘HEIGHT OFFS A MM’ higher than
‘HEIGHT OFFS B MM’;
‘SHELF WR. INP: xx’ : Bit 3 of xx:
‘HEIGHT OFFS A MM’ out of range;
‘SHELF WR. INP: xx’ : Bit 4 of xx:
‘HEIGHT OFFS B MM’ out of range;
‘SHELF WR. INP: xx’ : Bit 5 of xx:
‘SHELF CUTBACK MM’ out of
range;
‘SHELF WR. INP: xx’ : Bit 6 of xx:
‘SHELF CUTBACK SP’ out of
range;
‘SHELF WR. INP: xx’ :Bit 7 of xx:
‘HEIGHT TOLER. MM’ out of range
or higher than (‘HEIGHT OFFS B
MM’ - ‘HEIGHT OFFS A MM’) / 2;
——
117
CAN SHELF
SELEC.
CAN message timeout of the shelf
selector messages between traction
and pump controller.
Check can wiring
Error Message
Possible cause Fault elimination
Error
Error text