6
7
8.Overview
8.1.
Specification
5 digits 45mm large LCD display, 25mm digit height, white LED backlight.
4 Function Keys, Simple and easy.
Executive voltage:+5VDC。
Load Cell capability: Maximum 4 350 ohm analog load cell.
Zero signal input range: 0~5mV。
SPAN signal input range: 1~10mV.
Resolution: 1,000,000。
Increments: 1,000 ~ 30,000
A/D Rates: 30Hz。
Working voltage: DC 6V input, Lead-Acid rechargeable battery.
Working temperature: -10C~40C; Relative Humidity < 85%.
Storage temperature: -20C~60C; Relative Humidity < 85%.
Approved: R76-1
8.2.
Main functions
Basic weighting: Zero, Tare, Clear, Print, Calibration.
Auto backlight shut-down
Auto power off
IND212-500Y: not support embedded printer
IND212-501Y: support embedded printer
Rechargeable Lead-Acid battery charged by the special Charging Management Module
8.3.
Indicator Dimensions
188
132
152
9
.
Charging the Battery
9
.
1
.
Overview of Charging
Charging input: DC 9V 2.2A
Maximum charging current: 1.6A
Charging time: 8~9h
Rechargeable battery: 6V10Ah Lead-acid Battery
Anti-reverse protection
Over-charging protection
Over-current protection
9
.
2
.
Charging the battery
Please follow the following steps:
1.
Please connect the charger into the adaptor jack on the terminal's back side.
2.
Hold
key, when terminal finishes self-checking, it will show [CHARG].
3.
Press
key to confirm step 2, terminal will be into the charging stat us.
4.
Charging time: 8~9h。
5.
After charging, the terminal shows [FULL ].
6.
Please disconnect the charger after charging.
CAUTION
1.
DON’T USE TERMINAL WHILE CHARGING.
2.
DON’T CHARGE THE BATTERY TOO LONG TIME. PLEASE DISCONNECT
THE CHARGER IN TIME AFTER CHARGING.
3.
DON’T PUT THE BATTERY IN THE SEALED ENCLOSURE.