EOS Vitae protect+, Инструкция по сборке и эксплуатации

Страница: 24 / 41

24
EN
First make a rectangular cut-out in the cabin wall
as shown in the Fig. 5.
The wall above the radiator should be hollow
inside to let the hot air rise.
Draw the connection cable from the radiator up
to the ceiling through the duct in the cabin wall.
Pay attention that the cable connection of the
radiator must be oriented downwards
For details and safety gaps please refer to the
illustrations shown in Fig. 4, 5, 8 and 9.
Installation
Fig. 5
do
wn
ATTENTION!
Not suitable for horizontal installation
and installation in the cabin ceiling.
Risk of fire due to heat congestion.
200
1040
167
1020
~60
15
Front view
Dimensions in mm
Wall cut-out
with rear ventilation
Fig
. 7
At first insert the rear side panel into the cut-
out in the wall (fig. 6). Then insert the IR heater
into this rear side panel, so that it’s mounting
holes get lined up with those of the rear side
panel. Then screw the IR heater with the rear
side panel through these holes to the cabin
wall (fig. 7).
As the last step mount the front safety cover
grill with two screws at the top and at the bot-
tom to the IR heater.
Fig
. 6