EOS SBM-LSG-IR, Руководство по установке

Страница: 41 / 72

Relay Box for Infrared Cabins - Installation Instructions 41
Installation
2
Set jumpers JP1 and JP2 to foil (F) or emitter (R) depending on the con-
nected emitters.
See 5.2.2 Emitter type – jumper JP1 and JP2,

32

Setting the unit address
1
Set the unit address as needed.

The relay box is set to address no. 1 by default. As a rule, this setting
must not be changed.

Setting channel groups for IR emitters
1
Assign the IR connection with DIP switch to a channel group.

See Installation example,

51.
See 5.2.5 Channels – DIP switches IR1 to IR3,

34

Only 1 DIP switch may be set to ON at one time.
Examples:
Switch 1 = ON: Channel group A
Switch 2 = ON: Channel group B
Switch 3 = ON: Channel group C
You can assign the IR outputs to the same channel group, e.g. IR-1
and IR-2 to channel group A, IR-3 to channel group B.
1 2 3 4 5
ON
ADR
1 2 3 4 5
ON
ADR
1 2 3 4 5
ADR
ON
No. 1
No. 2
No. 3
1 2 3 4 5
ON
IR1