SBM-IR Modul - Operating Instructions
29
Operation
3.4.3 IR operating mode
After installation, you can set the operating mode, temperature and/or
intensity. You can also define the switching hysteresis for the IR emitters.
The IR emitters have two operating modes.
These operating modes let you determine how the IR emitters can be used:
via intensity and/or temperature.
Setting the operating mode
1
: Select and confirm.
2
Select the IR operating mode and confirm.
a)
IR intensity. In this operating mode, only the intensity of the IR
emitters can be set.
b)
IR temperature. In this operating mode, both the IR temperature
and the intensity of the IR emitters can be set.
Depending on the IR operating mode you select, you can now set the
temperature and/or intensity.
Operating
mode
Temperature
Intensity
Ambient temperature can be set via
temperature sensors
Emitters heat until the temperature has
been reached
All channel groups
at 100%
Ambient temperature increases slowly via
channel group intensity
Can be set for each
channel group
°C
IR
IR
°C
IR
26
°C
IR
°C
IR
IR
Operation mode
09:01
IR
°C
IR
