SBM-IR Modul - Operating Instructions
23
Operation
3.4 EmoTec IR, InfraStyle, InfraStyle i
All functions must be configured to commission the system. However, this
chapter describes only the settings for the IR emitters.
Add-on modules or accessories are detected after the unit is switched on
again and their corresponding icons appear in the sub-menus.
A complete description of the control panels can be found in separate
operating instructions.
EmoTec IR operation
EmoTec control panel
The following icons represent operational functions:
The home screen (standby) appears after the jog dial has not been touched
for 15 seconds.
Settings that have not been saved are lost.
Date and time are saved if the built-in battery is in working order. All
other settings are saved permanently.
A
Display
C
Switch cabin light on/off
B
Switch on/off
D
Jog dial
On/off
Jog dial:
Rotate = select functions.
Light on/off
Jog dial:
Press = confirm functions and settings.
09:51
B
A
C
D
