EOS Saunadome II, Инструкция по установке и эксплуатации

Страница: 20 / 38

7 GB
Technical data
Outer coating
Installation
dimensions
in cm
HWD
For cabin
volume
Minimum
dimension
for ventilation
and bleeding
Weight
without
stones and
packaging
Stone filling
Power control
unit (PCU)
required
to be used with the
control units
Expanded
metal with wide
bar mesh
100 x 41 x 41
9-14 m³
300 cm² Approx. 35kg Approx. 125kg
ECON D1, D2, D3, D4
ECON H1, H2, H3, H4
EMOTEC D
EMOTEC H
EmoTouch II +
14 18 m³
EMOTEC L09 18 - 25 m³
24 - 30 m³
Heater
power acc.
to DIN
Electr.
connection
Control unit
fuse in A
Fuses in the
PCU in A
Connection
mains -
control unit
Connection
mains - PCU
Connection
control unit
- heater
Connection
PCU - heater
Connection
control
unit - PCU
Power
control
unit (PCU)
required
9 kW
400 V 3 N
AC 50 Hz
3 x 16
3 x 16 5 x 2,5 ²
5 x 1,5²
no
12 kW
3 x 16 5 x 2,5 ² 5 x 2,5² 5 x 1,5² 4 x 1,5²
EMOTEC
L09
15 kW
18 kW
All information on cable diameters are minimum diameters in mm² copper line.
Caution!
Different heating charachteristic for sauna
heaters with a larger quantity of stones!
Please note that a considerable amount of
energy is required to heat the large quantity
of stones and that a relatively low convection
takes place due to the specifi c construction.
In comparison to conventional sauna heaters
this means that the cabin requires a longer
period of time to heat up and that is stays hot
for a longer time after the end of the operat-
ing time.
Measures for improved air circulation in
the sauna cabin may be necessary (forced
ventilation).
When splashing water on the rocks please
be aware that hot steam can also escape at
the bottom through the open mesh of the side
parts. Therefore please maintain a suffi cient
clearance! Danger of scalding!!