REVELATION
Ⅱ
REVELATION
Ⅱ
Alkaline Water Ionizer
Alkaline Water Ionizer
benzene or thinner........ Danger
Disconnect the power cord prior to cleaning.
Do not clean with paint thinner or benzene.
Do not spray water directly on the power inlet.
Do not spray water directly onto the REVELATION
Ⅱ
.
Instead, use a damp cloth.
Other Safety Precautions:
If you need to move the REVELATION
Ⅱ
, do not drag it by the
power cord as this will damage the unit.
Don't ever open up the REVELATION
Ⅱ
and attempt to disassemble
or repair it yourself. Doing so will void your warranty. Contact a
Water for Life USA warranty specialist.
Use only filtered water in a fish tank. Alkaline water may
kill your fish.
Cleaning:
Safety Precautions
12
Water Problems and Solutions
Soft Water:
Grains per Gallon = Less than 1.0
Milligrams per Liter (mg/l) or Parts per Million (ppm) = Less than 17.1
Slightly Hard Water:
Grains per Gallon = 1.0 to 3.5
Milligrams per Liter or Parts per Million = 17.1 to 60
Moderately Hard Water:
Grains per Gallon = 3.5 to 7.0
Milligrams per Liter or Parts per Million = 60 to 120
Hard Water:
Grains per Gallon = 7.0 to 10.5
Milligrams per Liter or Parts per Million = 120 to 180
Very Hard Water:
Grains per Gallon = Over 10.5
Milligrams per Liter or Parts per Million = Over 180
Water Problems and Solutions Chart
Water in the US varies greatly. Areas in the southern parts of the US usually have hard water
whereas areas in the northern parts sometimes have soft water. While the REVELATION
Ⅱ
can correct for some variation in the source water, it cannot handle all types of water because
some types of water simply can’t be ionized well.
You’ll know if your REVELATION
Ⅱ
is achieving the correct pH levels by using the provided
pH testing drops (red solution). Push the alkaline water level #4 button and the water “on”
button, put a small amount of this water into a small glass. Then add two or three drops of the
pH testing drops. You should see a dark purple color.
33
