14
EN
Attention!
If there is any skin desease or illness, you
should ask a doctor before using.
Ensure that this hot convection air can es-
cape by rising freely.
If necessary, appropriate steps should be
taken (e.g. thermal protection slabs) to
ensure that the wood is not exposed to
inadmissible temperatures.
• The infrared thermal emitter is equipped
with a silicon connection cable with a
3-pin connector. This connector is joined
to the connector of the infrared controller
with a free outlet.
Care must be taken to ensure that the
earth is properly tight.
• Up to 5 infrared thermal emitters may be
connected to this socket distribution.
For practical reasons, the connector should
be fitted to the booth ceiling.
• Take care to ensure that the special emit-
ter is not subject to any mechanical stres-
ses (knocks, pressure). Risk of breakage.
• Although breakage is unlikely if it is used
properly, if the ceramic emitter should
break, replace it with a new one.
Caution: fire risk in the case of a broken
emitter.
• The IR-emitter is designed for mounting in
a IR-warm cabin or sauna only. It just can
be used with a controller. The warranty is
not to apply for other use.
!
Attention!
Dear customer,
according to the valid regulations, the
electrical connection of the emitter and
the control box has to be carried out
through the specialist of an authorized
electric shop
We would like to draw your attention that
in case of a warranty claim, you are kindly
requested to present a copy of the invoice
of the executive electric shop.
!
Attention!
Only the original spare parts may be used.
Any modification of the cables included in
the delivery can lead to malfunctions and
is not permitted.
Any unauthorized technical alteration
makes the product warranty void.