9
Connections
Wireless Speaker Operation
Channel Switch
The Wireless Speaker can be set to receive either Right or Left Channel audio or Mono audio
from a stereo signal.
Volume Control
Master volume is set at the transmitter/source end. Local volume for each speaker can be
adjusted either from the speaker or from the IR wireless remote control. The IR wireless remote
control can also set the bass, treble and loudness of the speaker.
Zone Switch
The Wireless Speaker is Dual Zone. Depending on the transmitter source that you want to
receive, you can set the Zone Switch to either Zone 1 or Zone 2.
Link Button
This button is used to pair the Wireless Speaker with the Transmitter.
IR Remote Control
Remote control works on line of sight with the wireless speaker. To use remote, stand close to
the speaker you are adjusting and point the front of the remote at the speaker.
Wireless Speaker Sleep Mode
If the transmitter is turned off, the wireless speaker will go into a low power sleep mode. When
in Sleep mode the POWER staus LED will be off. This sleep mode avoids having turn off all the
speakers individually. When the transmitter is powered back on, the speakers detect this and
power themselves back on automatically, the POWER status LED will return to on.
Remote control setting increments
For optimal sound quality, each wireless speaker can be adjusted individually.
Below are the setting increments for the wireless speaker using the remote
control.
Treble - 7 steps (3 down to min - flat - 3 up to max) 2dB increments
Bass - 7 steps (3 down to min - flat - 3 up to max) 2dB increments
Loudness - 15dB increase (up on/down off)
Volume - 32 steps (min to max)
