13
Issue
No link
Interference (sound cutting
in & out)
No sound (link LEDs are
steady)
Distorted sound
Low volume
Solution
Make sure that the power LED is illuminated, if not check
power connections on the transmit and receive ends.
Bring the wireless speaker or receiver close to the
transmitter and retry the linking procedure.
When linking with Transmitter/Receiver unit, make sure
the MODE switch is set to the TX mode.
Make sure antennas are in the vertical position.
Elevate transmitter as high as possible.
Elevate speakers/receivers as high as possible.
Move further away from any wireless router or WiFi
enabled computers/printers.
Move transmitter to another place in the room or into
another room to see if reception improves.
Decrease distance between transmitter and wireless
speakers/receivers.
Check output & volume on audio source on transmit side.
Check to make sure Zone switch is in the proper position
on receive side.
Check Link status and power
Reduce Audio volume at the source.
Reduce Audio volume at the wireless speaker.
Adjust Bass and Trebile levels (using remote).
Turn off Loudness feature (using remote).
Increase Audio volume at the source.
Increase Audio volume at the wireless speaker.
Wireless Audio Troubleshooting Guide
Troubleshooting
