11
Issue
No link
Interference (sound cutting
in & out)
Distorted sound
Low volume
Solution
Make sure that the power LED is illuminated, if not check
power connections on the transmit and receive ends.
Bring the wireless speaker or receiver close to the trans-
mitter and retry the linking procedure.
When linking with Transmitter/Receiver unit, make sure
the MODE switch is set to the TX mode.
Make sure antennas are in the vertical position.
Elevate transmitter as high as possible.
Elevate speakers/receivers as high as possible.
Move further away from any wireless router or WiFi en-
abled computers/printers.
Move transmitter to another place in the room or into
another room to see if reception improves.
Decrease distance between Transmitter and wireless
speakers/receivers.
Reduce Audio volume at the source.
Reduce Audio volume at the wireless speaker or amplifier.
Increase Audio volume at the source.
Increase Audio volume at the wireless speaker or amplifier.
Wireless Audio Troubleshooting Guide
Troubleshooting
